731
General Mach Discussion / Re: New PC, what to move from old one?
« on: October 01, 2015, 09:05:13 AM »
You will need to copy over teh XML file from your old PC to teh new one.
You do realize that changing PCs may NOT solve your problem. This has ALWAYS been a problem with multiplexed systems. On the PC here it was NEVER a problem until I upgraded the DHTC. THEN the problem started. After bypassing teh Torch signal so that it did NOT use a multilplexed signal it has been fine. I do believe teh problem is with HIS multiplexing of the signal. THere are MORE than plenty enough LPT signals to run a plasma without multiplexing (;-).
You can draw your own conclusion from that. (;-) I have NO idea why Tom did not step up and suggest the fix for you. It is outlined on a doc from HIS website . I will find it for you.
(;-) TP
You do realize that changing PCs may NOT solve your problem. This has ALWAYS been a problem with multiplexed systems. On the PC here it was NEVER a problem until I upgraded the DHTC. THEN the problem started. After bypassing teh Torch signal so that it did NOT use a multilplexed signal it has been fine. I do believe teh problem is with HIS multiplexing of the signal. THere are MORE than plenty enough LPT signals to run a plasma without multiplexing (;-).
You can draw your own conclusion from that. (;-) I have NO idea why Tom did not step up and suggest the fix for you. It is outlined on a doc from HIS website . I will find it for you.
(;-) TP