Machsupport Forum
Third party software and hardware support forums. => PoKeys => Topic started by: Ignacio Plass on December 02, 2010, 12:11:44 PM
-
hello.
I'm new, from Spain,
I have a router running Mach3 and Pokeis55, I have a 4x20 character LCD, but I can not see the values of the DRO, XYZ and A. This solved this?.
Gracias
-
Mach plugin for PoKeys on www.poscope.com
Read manual in plugin.
regards
Boris
-
hello.
comfiguracion LCD's work,
ok but how to operate the lever potentiometers. is also the progracion macropump and VB, or directly by the pokesys55,
gracias
someone who has developed this before? There are examples, photographs, etc. .. of work?
Gracias desde Barcelona
-
Just use PoPendant settings in plugin and all hould be configured
regards
Boris
-
hello.
can prevent flickering of the LCD, used by the Pokeys?
Gracias
-
hi from spain
I am waiting my pokeys
Espero lo hayas podido configurar
Saludos
-
hello.
continuous creation of a control panel.
45 keys.
3 MPG.
1 display.
1 4-axis lever
1 touch pad.
4 potentiometers.
I need help.
the display works.
the 3 MPG. work.
but I need to program the keys on the multiplexer.
and support for the 4 analog inputs
y para el español, donde estas, tienes alguna idea de mi problema?
Gracias
-
At the moment I haven´t it.
No me ha llegado todavía, Caripean, cuando lo tenga tengo que configurarlo y ya te contaré como me va.
Regards
-
hello.
I configured the three MPG and works .. 47-key keypad with 10x5 matrix, and it works. LCD works with Macropump system.
I do not understand the analog inputs.
My intention is to control 4 functions;
1 FRO
2 speed spindle
3 MPG feed rate
4 Slow Jog Rate
someone can show examples of use and control of the analog inputs?
Gracias
-
when you set the 1st four, analogs (starting at lowest pin number), for analog in, then if you will look at the OEM "PoKeys.set" screen set, on the PoKeys page in that screen set, you will see 4 analog input DROS that should change value as you turn yoru pots. NOTE: READ the Flash HELP by pushing the HELP button in the PK config dialog of the plugin!!!
then in Brains, or Macro pump, your choice. Map the analog UserDROs to the funcs you want.
See "Brains users guide" in the member docs section further down. in this forum......
scott
-
hello.
good response.
I searched the forum pokeys solution, and are Brian Mach,
now to investigate.
thanks
;)
-
hello.
continuing my work as I have a hard finish.
here are some photos.
-
the final aspect of the machine
-
This is a very nice setup you have my friend.
Could you tell us about your mill.
Never seen one like that before.
Jeff
-
gracias Jeff.
Is a Mill Wabeco 1410 hf
https://www.wabeco-remscheid.de/index.php?cat=c16010_F1410-LF---F1410-LF-hs.html&subpage=basics&picture=2
modified for the CNC control.
ball screws. and 6-axis meter. HEIDENHAIN.
with an accuracy of 5 milli of a millimeter.
machinery is a marvelous.
is the second machinery I have of this brand are very good German quality.
and many hours of work and lot of love
From Barcelona Spain,
Ignacio
-
hello, one video of my mill
http://www.youtube.com/watch?v=gYh70ZxjiS8
-
Ignacio,
Nice job. Did you wire all the electronics or did you use our expansion boards for this?
Arturo Duncan
http://cnc4pc.com
-
hello.
all handmade by me.
I only bought the pokesys. wiring and circuit boards I have designed myself. HEIDENHAIN keys are original. LCD is bought on Ebay.
I'm still configuring the software for analog inputs and buttons, to be run on a screen of Mach3 which I designed with Screen4.
thanks for the question.