5391
General Mach Discussion / Re: Turning ON Tool Change and Safe Z Positions
« on: August 11, 2011, 10:26:01 AM »
Be aware before you crash the machine(;-) that those coordinates need to be in MACHINE corrds not users coord. The machine needs to be refhome at startup to insure the correct positions BEFORE that function is used.
To get Machine coords jog to where you want it to be then from the main screen select machine coords and use those values. that way the machine MOVES to the correct spot regardless of the user offset and tool fixtures being used.
Just a thought, (;-) TP
To get Machine coords jog to where you want it to be then from the main screen select machine coords and use those values. that way the machine MOVES to the correct spot regardless of the user offset and tool fixtures being used.
Just a thought, (;-) TP