Messages

3261

General Mach Discussion / Re: Getting New Installation Going

« on: April 06, 2006, 11:13:50 AM »

The XML's are in the Mach2/3 Dir

3262

General Mach Discussion / Re: Type of limit switch to use

« on: April 06, 2006, 09:06:56 AM »

Should work great! but i don't know how well the distance will repeat..

3263

General Mach Discussion / Re: Homing in Mach 3

« on: April 06, 2006, 09:05:35 AM »

Is that computer hooked to the internet? I may be able to do some support with MSN messanger

3264

General Mach Discussion / Re: Sony laptop

« on: April 05, 2006, 06:13:40 PM »

Laptops are not the best to run Mach on... Some work and some don't... Anyone have laptops that run out there?

3265

General Mach Discussion / Re: Second startup lock up

« on: April 05, 2006, 06:11:47 PM »

Look at doing this : http://www.machsupport.com/optimisation%20XP.txt

3266

Mach3 and G-Rex / Re: Maping I/O on G100?

« on: April 05, 2006, 04:49:21 PM »

I just got done the bench testing and have moved on to putting it in a machine I have started to wire the mill so I hope it is not going to be to long ...

3267

LazyCam (Beta) / Re: Lazy Cam in Mach3 download

« on: April 05, 2006, 12:10:00 PM »

Mach3 Dev. Version 1.90.025  will install Lcam on your system...

3268

General Mach Discussion / Re: wrong feed rates at the machine

« on: April 05, 2006, 12:07:54 PM »

If I tell it to  move 2" it moves 2", If I tell it to  make a 3" diameter circle it makes a 3" diameter circle. The problem is that if I tell it to make that circle in 1 minute it takes about 2 minutes.  Both the X and Y axis are set at 180 ipm with an  acceleration of 3"/sec^2.

3"/sec^2 is about half what I run ... Could you please post your XML file?

3269

Mach3 and G-Rex / Re: Maping I/O on G100?

« on: April 05, 2006, 10:46:12 AM »

It should be ready but I don't have mine hooked up now IT well be about a week and I will be able to help you with this...

3270

Mach3 and G-Rex / Re: Mach3 and 4 on the same pc?

« on: April 05, 2006, 10:44:52 AM »

I have them both running on the same PC