Messages

591

Third party software and hardware support forums. / Re: MB3 Breakout Board Power Supply

« on: June 21, 2020, 06:13:35 PM »

Have you set the 3 jumpers on the ESS correctly and you have the 24V going into the MB3 at the corner of the board.  Also check the fuse on the board.

592

Mach4 General Discussion / Re: EMCO 6P CNC retrofit - M6 Issue

« on: June 20, 2020, 07:16:08 PM »

Great stuff, 

593

Mach4 General Discussion / Re: Advice for getting my CNC software back up to date?

« on: June 20, 2020, 07:07:04 PM »

Don't fix what ain't broken.

594

General Mach Discussion / Re: PDB issue Mach 3 ATC

« on: June 20, 2020, 07:04:26 PM »

There is far more to this than just a screen set, there are images and macros too.

595

General Mach Discussion / Re: PDB issue Mach 3 ATC

« on: June 19, 2020, 08:20:40 AM »

So the M6Start.mcc is not a Mach3 file, so we need your M6Start.m1s file from your working profile.

Do you have a tool change page on your screen, if so post a picture of that too.

596

General Mach Discussion / Re: PDB issue Mach 3 ATC

« on: June 19, 2020, 08:06:31 AM »

Are you running Mach3 or Mach4 because you have files from both here M6Start.mcc is compiled Mach4 Lua and M131.m1s is Visual Basic from Mach3

597

Third party software and hardware support forums. / Re: MB3 Breakout Board Power Supply

« on: June 18, 2020, 10:19:21 PM »

It should be fine, the rating us usually the minimum requirement for reliable use, you could put a 3A fuse in line to the board to stop any faults cooking the board.

598

General Mach Discussion / Re: Mach3 gcode parameters

« on: June 17, 2020, 09:03:06 AM »

Mach3 has no loops jumps or ifs, Mach4 has full Macro support

599

Share Your GCode / Re: engraving on a pool cue ?

« on: June 16, 2020, 08:22:40 PM »

CNC Wrapper will put your flat code round a cylinder. Web site is saying not available right now so not sure what is going on with it.

600

General Mach Discussion / Re: Mach3 Plasma G Code Loading Larger Than Table/Off Of Table

« on: June 15, 2020, 03:50:54 PM »

I would guess the DXF files are in metric so your gode is 25.4 times size