Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: fiordlander on November 02, 2006, 05:41:40 PM
-
Hi, My system frequently resets the z cutting height midway through executing a file. It doesn't happen all the time. Can anyone shed light on this ?
Cheers
-
Do you have an external button that will set the Zheight?
-
just the ones within mach3.
-
Have had similar experience - but it always appears to be the result of something I have screwed up. Generally this has occurred when when producing G-code in LCAM and I failed to notice a "Z" height or depth change. Now, I make it a practice to edit the G-code and look for changes in the "Z", parameters.
Bob @ BobsShop
-
OK good suggestion.At least it will stop it happening.Thanks
-
Found the problem which was interference from cad program minimised in tray bar.
-
Is this a closed case? Will you confirm that it is fine now and the error was caused by
interference from cad program minimised in tray bar.
?
Just trying to keep up.
Brett
-
Yes Problem solved. It was definitely some call the minimised cad programme was making.