511
General Mach Discussion / Re: Normally Open VS Normally Closed
« on: August 13, 2016, 01:41:18 PM »
Did you have that or did you have GetOemLED(13) ?
I presume you are using the coolant output option in Mach?
What I suspect is happening is you have the Coolant On, you are resetting the output but the coolant button is still on so Mach switches it back as soon as you switch off.
That is why I suggested the DoOemButton be used..
Your UserLeds should work fine as long as you only ever turn on/off via that script and not by other means. But do you really need to know? What I mean is if your vac pump requires to be switched off you can reset the outbit and if it is already off it doesn't matter a toss.
Hood
I presume you are using the coolant output option in Mach?
What I suspect is happening is you have the Coolant On, you are resetting the output but the coolant button is still on so Mach switches it back as soon as you switch off.
That is why I suggested the DoOemButton be used..
Your UserLeds should work fine as long as you only ever turn on/off via that script and not by other means. But do you really need to know? What I mean is if your vac pump requires to be switched off you can reset the outbit and if it is already off it doesn't matter a toss.
Hood