4021
General Mach Discussion / Re: 2D files
« on: December 08, 2010, 06:01:29 PM »
If you want to fool around with a 2d file you can use the one i have posted in the members docs for the Lazycam Manual.
If you want to engrave then just select the whole thing or parts of it and define a small depth of cut.
I will echo what Gerry said about CAM software as their cost is high and increases with what the software will do
and what it provides or is included. Have a look at Vectric product comparison and compare to other software to get a flavor.
I just started using MeshCam, like it, and as it suites my need, but, i also have other software which complements it.
What is good for one can be totaly wrong for another user. Time spent on a 2d package will not be wasted as the experience is directly applicable
to more complex machining.
RICH
If you want to engrave then just select the whole thing or parts of it and define a small depth of cut.
I will echo what Gerry said about CAM software as their cost is high and increases with what the software will do
and what it provides or is included. Have a look at Vectric product comparison and compare to other software to get a flavor.
I just started using MeshCam, like it, and as it suites my need, but, i also have other software which complements it.
What is good for one can be totaly wrong for another user. Time spent on a 2d package will not be wasted as the experience is directly applicable
to more complex machining.
RICH