Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: mojalovaa on January 26, 2014, 05:43:56 PM
-
Hello everyone.
I need yours help .
I started make machine for stacking electronics, pick and place machine, but can not find a program that would support the use of LPT ports for communication .
I see that some use Mach 3 with VB scripts to start the machine, I must say unfortunately really do not know anything, so if you would like to have someone to help me to understand how it works and how to use it.
If have anyone who wants to help, let them come on this topic I would tell him what would all supposed to be doing with the machine, and all other information you need to start to be able to show me what needs doing.
Thanks
-
I'll try to describe how the program should work .
Position information of the components using the program eagle 5.6.0 or some of new version .
That look like this :
Part name X position Y position A position (angle ) Part housing ( part dimension )
LD1 56.54 69.23 330 61-23RGBC/TR8 PLCC6
LD2 43.87 69.33 30 61-23RGBC/TR8 PLCC6
LD3 61.97 78.95 330 61-23RGBC/TR8 PLCC6
LD4 49.93 81.18 0 61-23RGBC/TR8 PLCC6
LD5 38.31 78.88 30 61-23RGBC/TR8 PLCC6
R1 76.05 87.15 147 R1206
R2 24.00 87.15 215 R1206
R3 7.10 35.45 290 R1206
R4 50.30 4.65 2 R1206
Now we take that each of these components is different and that is a feeder to another place, and the program runs to the sea every time you pick up a component on this line at the second position .
Something like this :
feeder 1 / feeder 2 / feeder 3 / feeder 4 / ........ feeder 30 /
http://makezine.com/2012/05/20/diy-pick-and-place/
You can see how that look on that web page :