1
CS-Lab / CNC Router Retrofit to CSMIO/IP-S
« on: June 14, 2016, 04:47:17 PM »
I'm in the process of retrofitting a 1212 CNC Router motion control to CSMIO/IP-S. The machine is currently up an running with the import BOB. I just need to verify connection to the VFD. I'm currently able to control spindle on/off and spindle rpm.
Here is the current BOB connections.
BOB VFD
0-10v AI
GND CM
COM CM
P2 FWD
Here is what I believe it needs to be on with CSMIO/IP-S. Please help me if this is not correct.
IP-S VFD
Analog 0-10v (Pin 1) AI
GND (Pin 2) CM
Digital Out 0V(Pin14) CM
Digital Out 0 (pin 0) FWD
Thanks, Jon
Here is the current BOB connections.
BOB VFD
0-10v AI
GND CM
COM CM
P2 FWD
Here is what I believe it needs to be on with CSMIO/IP-S. Please help me if this is not correct.
IP-S VFD
Analog 0-10v (Pin 1) AI
GND (Pin 2) CM
Digital Out 0V(Pin14) CM
Digital Out 0 (pin 0) FWD
Thanks, Jon