1381
General Mach Discussion / Re: Threading on lathe issues
« on: March 01, 2015, 02:22:38 PM »
Have a read of Threading On The Lathe which can be found in Members Docs.
http://www.machsupport.com/forum/index.php/topic,13017.msg85313.html#msg85313
May need to set your rpm manualy as that can interfere with the threading cycle.
Not sure about version .066 infulence,as i have not used it, and others have gone back to earlier version
due to problems with it.
Make sure you have 3- 5X pitch of movement before actual threading to allow for axis acceleration
I'll let others reply about .066 who have tried or used it.
RICH
http://www.machsupport.com/forum/index.php/topic,13017.msg85313.html#msg85313
May need to set your rpm manualy as that can interfere with the threading cycle.
Not sure about version .066 infulence,as i have not used it, and others have gone back to earlier version
due to problems with it.
Make sure you have 3- 5X pitch of movement before actual threading to allow for axis acceleration
I'll let others reply about .066 who have tried or used it.
RICH