Hi,
yes there is a pulse frequency in Mach Diagnostics but it relates to a parallel port which you aren't using, in fact you CANT use it, your PC and OS are wrong for it.
The frequency displayed then has no relevance to the output pulse frequency of the controller.
MPGs and Encoders are inputs to Mach, if you had a hand wheel for instance to jog an axis you would hook the hand wheel to the controller and then tell Mach how those
signals are to be interpreted. They have no bearing on the pulse output of the controller.
We need good documentation about your controller. I suspect that its Chinese and you'll get nothing from them. If you spent a couple of hours reading posts on the
forum from the last month alone you'd find 100 or more posts along the lines 'No support from Chinese manufacturer....No documentation....Doesn't work...'
and the list goes on. Unless you get GOOD documentation from them (small probability) then give it up as junk and buy yourself a decent controller.
Do not buy anything until you've sought and gotten some informed opinions on the board you are considering.
The Chinese must love us, we buy cheap, but 'That's OK they don't have to work and we're not going to respond to any complaints so we will take the stupid white mans money!'
Sorry...I get pretty worked up about the Chinese ripoffs out there. Of course Delta is Taiwanese/Chinese and they are great, if I could afford them I would be buying
flat stick. So don't assume that because its Chinese it must be crap but it true also that if its Chinese it may very well be crap or a ripoff. If you can't get positive
feedback from others BEFOR you buy don't touch it.
It may well be that your board is adequate but we can't get it to work because we cant interface it to your controller but could if they would only give us some
documentation and a circuit diagram of the output circuit. Fingers crossed.
https://warp9td.com/This is what a real ESS looks like and a company who backs up what they sell. Of course I'm biased, I own and use an ESS....
Craig