7020
« on: May 04, 2011, 03:21:30 AM »
Chad,
This appears to be a Mach / PC related problem in so far as the length of the GCode is concerned. I have now run your code twice and had errors on both occasions.
In my case the X axis Scale DRO is changing to -1.0000 of it’s own accord and the machine takes off to the other side of the table.
I have another PC which has the maximum RAM and I will try that just to see if it is a memory paging issue but I have examined the GCode itself and can find nothing that would cause this fault so I can only conclude that it is the size / length of the GCode which is upsetting either Mach3 or the PC.
Reworking your model to produce a number of smaller programs which could be executed concurrently may provide a practical solution and for now, be the best way to proceed.
Could anyone else perhaps try this CGode and see if they have problems also ?
Tweakie.