3
« on: May 08, 2017, 06:43:32 PM »
Been tinkering with it now...
I tried switching out the USB cable to see if perhaps it was kinked.... When I unplug and replug in...
On Unplugging,
Mach3 first says "Is the Xpod Inserted OK? It has ceased to respond..."
On re-plugging
I get the windows connect sound, that the USB has been inserted.
I press RESET in Mach3, and I will get control of the machine again for a short amount of time 3-10 seconds before machine locks up.
Mach3 reports "Warning!DeviceResetted! Please ReHome."
But from this point on, machine is frozen, though mach3 will report changing DRO's once I've pressed RESET.
So definitely a Computer sided problem I think?
The only change I did today was connect a pair of bluetooth headphones to windows. Other than that I didn't really do anything.