Messages

3251

Mach3 and G-Rex / Re: no ip on rex

« on: April 08, 2006, 03:40:19 PM »

What is your computers IP?

3252

Mach3 and G-Rex / Re: no ip on rex

« on: April 08, 2006, 07:28:33 AM »

I had to trun off my wireless to get it to work...

3253

General Mach Discussion / Re: Best computer to run Mach

« on: April 08, 2006, 07:23:37 AM »

it is a problem IF the video shares the RAM of the computer... I have onboard running here to but I have seen some that will not too...

3254

General Mach Discussion / Re: mach2 but not mach3?

« on: April 08, 2006, 07:20:32 AM »

There is an OEM code to do that and I think it is 720... I will get back to you.

3255

General Mach Discussion / Re: Odd Z movement

« on: April 07, 2006, 04:18:56 PM »

IT is going to take me a bit but I think I am going to have to make a video showing how to do tool offsets

3256

General Mach Discussion / Re: Best computer to run Mach

« on: April 07, 2006, 06:30:30 AM »

Thanks, Brian.

Can we use AMD and Intel processor?

For HT (virtual dual processor), do we need to disable it?

Can we just disable the on-board video board and use an add-on?

For the parallel port, can we use PCI parallel port?

Thanks,

Pierre

I have an AMD here running... and I have an intel running it at work.
Some have to disable the HT but I have nt had a problem...
Yea The on board video should be okay if you disable it (I have that on this system)
PCI Pport cards work great!

Hope that helps
Brian

3257

General Mach Discussion / Re: demo

« on: April 07, 2006, 06:27:27 AM »

Have you tried to reinstall Mach 3 (Write down your settings).

3258

General Mach Discussion / Re: Motor Tuning Screen Not Opening

« on: April 06, 2006, 06:09:08 PM »

That is odd... I have never heard of that! did you press rest?

3259

LazyCam (Beta) / Re: Access violation Error in NTDLL 7c90eb8d sysenter

« on: April 06, 2006, 11:18:07 AM »

the jpg and bmp foles will be fixed in a bit This is a known bug at this time and should be fixed soon.
Thank you
Brian

3260

General Mach Discussion / Re: Loosing Y Axis position at the end of job.

« on: April 06, 2006, 11:16:20 AM »

Why don't you turn down the Accel for the y axis a bit and see if that helps.