Messages

2031

General Mach Discussion / Re: How to input the setover for the routing tool

« on: November 08, 2006, 06:59:21 AM »

You will need to set the stepover in BobCad... I can't help you do that as i don't run it

2032

General Mach Discussion / Re: Fast Z on 2.5D machine

« on: November 07, 2006, 06:51:08 AM »

That is odd I have tested it here a few times  Coudl you post an example Gcode and I will see what is going wrong.

Thanks
Brian

2033

Mach SDK plugin questions and answers. / Re: MACH SDK & Visual Studio 97

« on: November 07, 2006, 06:47:46 AM »

That is what we are running and I have no idea if it will work with the old VC++ I know you can't get it to work with the new versions of VC++ 2005


Thanks
Brian

2034

G-Code, CAD, and CAM discussions / Re: G1 on every line causing choppiness

« on: November 06, 2006, 06:44:55 PM »

Is this on the newest version?

2035

Mach SDK plugin questions and answers. / Re: MACH SDK & Visual Studio 97

« on: November 06, 2006, 06:33:12 PM »

VC++ 2003 is what we are running

Thanks
Brian

2036

General Mach Discussion / Re: motor tuning

« on: November 06, 2006, 06:32:20 PM »

Try Sherline mode under the ports and pins page. You will need to exit the software to have it take effect.

Thanks
Brian

2037

General Mach Discussion / Re: Fast Z on 2.5D machine

« on: November 06, 2006, 06:29:38 PM »

Take out the Mcodes they are WAY to slow for what you are looking to do

Try using E1 P1 for external activation 1 ON
and E1 P0 to turn it off

I think that is how it works... there is an example on the forum some place... The E1P1 needs to be on it own line btw

Thanks
Brian

2038

General Mach Discussion / Re: Bugs in Mach3

« on: November 06, 2006, 06:26:21 PM »

When you are setting up your machine please set keep exiting the program when you have a setting that you like. The problem is that we can only save the XML on exit

2039

Newfangled Solutions Mach3 Wizards / Re: No tool path plotted in Cut Arc Wizard

« on: November 05, 2006, 05:35:31 PM »

You sound like you are haveing fun and I like that!

2040

G-Code, CAD, and CAM discussions / Re: G1 on every line causing choppiness

« on: November 05, 2006, 05:31:57 PM »

That is odd... I have not seen that what are you running for a computer?