2461
G-Code, CAD, and CAM discussions / Re: G10 L20 or setting DROs to zero from G-code
« on: October 08, 2017, 06:07:46 AM »
Hi Kusti,
Easiest way to set a DRO from within Gcode is…
#99aaa = bbb
Where aaa is the DRO number and bbb the value you want to set.
DRO numbers can found in the OEM code list here; http://www.machsupport.com/forum/index.php/topic,9312.0.html
This method is totally Mach3 specific.
Tweakie.
Easiest way to set a DRO from within Gcode is…
#99aaa = bbb
Where aaa is the DRO number and bbb the value you want to set.
DRO numbers can found in the OEM code list here; http://www.machsupport.com/forum/index.php/topic,9312.0.html
This method is totally Mach3 specific.
Tweakie.