2061
General Mach Discussion / Re: MACH3PLASMA LIMIT SWITCHES FOR G540/PROMA
« on: February 15, 2018, 01:29:05 AM »I got Z axis running under test mode, making movement up / down and recognizing itself in mach3. What is M1 home m2 home and m3 home? My M3 Home is lit up with torch on, m1 Home is lit with torch up, m2 home is lit up with torch down.
M1 M2 M3 home are the home liit Switches from X Y and Z axis.
so it Looks like you have configured home Limits (Config -> Ports&Pins -> Inputs) to the same port and pin like the torch signals.
Quote from: LexMotorsports
Should it be toggled on flashing?
i think it has to Flash.
i will try to Setup TNC this afternoon on my mill, to see what we arer missiing.
Thomas