According to sellers, these are the appropriate drivers.
These are the specs of this system:
- 4 motors NEMA 34: 1317 oz-in, 5.7 V and 3.0 A/phase
- 4 drivers: SD-2H086MB
Suitable for-2-phase and 4-phase motors
Output current up to 5.86A
Dip switch current setting 8different values
Optically isolated input signals
Pulse frequency up to 200KHz
Supply voltage up to +80VDC
- a breakout board
- Power Supply: 220W, 24VDC
Can you advise me on this?
Thank You again.
E.