Messages

611

General Mach Discussion / Re: Code wanders off?

« on: April 06, 2008, 12:12:07 PM »

I have run this file 40 times and have had no trouble... I see that you are not using the 1024.set screen.. Could you please test with the 1024 screen and tell me if you have the same trouble? Also I see that you are not running the files on the C drive... Could you please put the file on the C: drive and tell me if this fixes the problem?  The Problem is that it is a memory mapped file This is needed to run the VERY large files...
Thanks and all told I have run your file about 60 times with no problem I don't think I am going to see the problem but I have a few more machines that I can test on.
Brian

612

General Mach Discussion / Re: Code wanders off?

« on: March 30, 2008, 10:49:36 AM »

Hello,
I have only 2 reports of this and so it is very hard to find the problem... I will work to get this fixed as soon as i get back on the 3rd.

Thank you for the XML and I hope this will help to show the trouble!

thanks
Brian

613

General Mach Discussion / Re: Code wanders off?

« on: March 28, 2008, 03:21:52 PM »

Also could you tell me where you are running the file from?? are you running from the local hard drive ? Over the network ??
Could I please have your XML as well 
Thanks
Brian

614

General Mach Discussion / Re: Code wanders off?

« on: March 28, 2008, 01:27:43 PM »

I will test today ... I am headed to LA for Westec tomorrow and will be back working on the 3rd... So if I can not find the problem today I will get on it after I get back.. Thank for the code and any info that you can give me

Brian

615

General Mach Discussion / Re: Code wanders off?

« on: March 27, 2008, 09:48:31 AM »

Hello,
Please post the code and I will have a look... And is this with Rev 3.039??
Thanks
Brian

616

General Mach Discussion / Re: Mach3R3.037 & Windows Task Manager CPU % Load

« on: March 24, 2008, 07:46:47 PM »

Looks to me that your CPUload has everything to do with your Toolpath and not VB.. I am looking into a rewrite of the toolpath code.. Should get started in a few weeks or so
Thanks
Brian

617

Mach SDK plugin questions and answers. / Re: Shuttle Xpress Problem

« on: March 21, 2008, 09:56:52 PM »

This weekend I will see if I can get some time to un my router and test the shuttle.. You are the econd one that has reported this but I have not seen it   I will be testing with Rev 3.038 and I will tell you if I find anything.
Thanks
Brian

618

Mach SDK plugin questions and answers. / Re: Shuttle Xpress Problem

« on: March 21, 2008, 09:41:36 PM »

That should not be.. What do you have for a machine???

Do you have any other hardware / softwarethat could be slowing the machine down? Also do not install the drivers.

Thanks
Brian

619

Galil / Re: Mach3 + Galil

« on: March 08, 2008, 09:47:31 AM »

If you would like to probe I would stay away from the Galil at this time... I have boards and so on on the way so I can test the Galil on the new router that I have here but I have no idea how long it is going to take me to get this all working I need about 3 more of me to keep up with the work load

I think the best thing to do at this time is to make a machine that will run from a desktop computer and change it over to a Smooth stepper as soon as they are out

Thanks
Brian

620

General Mach Discussion / Re: its gonna be one of those days.

« on: March 05, 2008, 02:19:04 PM »

I added code to tell Mach not to run a sub if thre is an L of 0 and looks like the default is 0 not and not 1 . I will see if I can change that
Thanks
Brian