1
General Mach Discussion / Re: Another help request.
« on: August 14, 2012, 10:31:59 AM »
FIXED!!! When in doubt, check that which is assumed.
Assumption: When passing color coded wires thru a cable connector, the color that goes in is the same color that comes out, especially when only red and black are used!
What happened. All my testing was good and worked except when I re-connected all of the wires that went thru the connectors. All of these were good except one pair. The Red and Black pair going to the SSR. So, the polarity was inverted so the switch did not work!
All day for a stinking factory color code problem.
Now to check the E-Stop!
Thanks guys. You helped me think thru it.. A good night sleep helped to!
Steve
Assumption: When passing color coded wires thru a cable connector, the color that goes in is the same color that comes out, especially when only red and black are used!
What happened. All my testing was good and worked except when I re-connected all of the wires that went thru the connectors. All of these were good except one pair. The Red and Black pair going to the SSR. So, the polarity was inverted so the switch did not work!
All day for a stinking factory color code problem.
Now to check the E-Stop!
Thanks guys. You helped me think thru it.. A good night sleep helped to!
Steve