5750
« on: June 05, 2011, 01:05:58 PM »
Electronic gearing is where the DRIVE can take 1 pulse from the controll then output a mulitipled BLOCK of pulses (Say 10x) to the motor for each input pulse.
IF you can "simply" change the resolution of the encoder, try it you may like it. Don't forget to reset the motor tuning to match.
IF not then try other approachs.
It is always about the final results rarely about how you get there, UNLESS you have restrictions in hardware. Then you are limited to approaches that use the GIZMOs you have to work with.
Just a thought, (;-) TP