1
General Mach Discussion / Re: strange problem
« on: March 24, 2009, 09:29:58 PM »
Hey Guys,
Sorry it took so long to get back. I read your posts and it triggered something in my brain and after another two full days a tinkering I finally got it all figured out. It all amounted to I'm new with setting up the CNC machines and it just took a bunch of trail and error till I had tried every combination on getting the machine calibrated properly. The G-code was right I just didn't have the steps programmed right.
Thanks
Sorry it took so long to get back. I read your posts and it triggered something in my brain and after another two full days a tinkering I finally got it all figured out. It all amounted to I'm new with setting up the CNC machines and it just took a bunch of trail and error till I had tried every combination on getting the machine calibrated properly. The G-code was right I just didn't have the steps programmed right.
Thanks