Messages

351

LazyCam (Beta) / Re: Lcam 2.0...

« on: June 02, 2007, 01:14:31 PM »

MR Brian

you don't have to post a response to this.downloaded lc2.05 today.i like the way the indavidual chains rotate will be
looking forward to rotating the whole drawing as the future realeases come out.when doing offsets on a rectangle
using any combination (in,out,cw,ccw) it's good.when doing offsets on a circle with differant combos it has trouble.
looking forward to the next version.

thanks bill

352

LazyCam (Beta) / Re: Lcam 2.0...

« on: June 01, 2007, 09:09:59 PM »

MR Brian

you and art are really doing a super job,made me a true recuit.i enjoy playing with the new lcam.BTW how many
keyboards do you burn up a year.if i run into something else i will bring it to your attention.so far the little items
that i have noticed has not hurt my work any.i also know you need info.thanks for the product.

bill

353

Show"N"Tell ( What you have made with your CNC machine.) / some mach3 inlay work

« on: June 01, 2007, 04:26:20 PM »

i used mach3 for the lay work,and some short parts.

bill

354

LazyCam (Beta) / Re: Lcam 2.0...

« on: June 01, 2007, 01:14:35 PM »

MR Brian

this has to do with after creating a offset,when using a circle.i was playing with offsets using a
circle,after creating a inside or outside offset,when leaving the check box unchecked for direction of cut then creat
offset when you try to highlight the new chain it wont highlight.if you do this to a rectangle it works right.


thanks bill