2841
General Mach Discussion / Re: Jog Y in minus and X motor moves
« on: June 04, 2006, 09:50:56 PM »
They don't need to be touching, they only need to be close. It is the EMI comming off the X motor wires that is the trouble...
Pull the X motor wires out of the box and see if that helps. This type of a hardware problem is very hard to track down at times.
hope that works
Brian
Pull the X motor wires out of the box and see if that helps. This type of a hardware problem is very hard to track down at times.
hope that works
Brian