1671
General Mach Discussion / Re: Bridgeport Knee Mill Conversion?
« on: May 23, 2016, 04:09:45 PM »
Ok, I'm holding the alterations to the spindle drive for the moment, will keep the vari-speed and modify later - better things to focus the cash on.
Drives and motors...
These are the drives... http://www.aliexpress.com/store/product/New-Servo-motor-and-driver-set-2-4N-M-0-75KW-3000RPM-90ST-AC-Servo-Motor/314742_760999511.html
I have one on the bench for testing with the CSMIO and an old Mach3 setup.
Do servo drives need any setting up ? I have set the motor model in the drive but the rest of the million settings? Never used a servo before
Anyone know these specific drives?
Drives and motors...
These are the drives... http://www.aliexpress.com/store/product/New-Servo-motor-and-driver-set-2-4N-M-0-75KW-3000RPM-90ST-AC-Servo-Motor/314742_760999511.html
I have one on the bench for testing with the CSMIO and an old Mach3 setup.
Do servo drives need any setting up ? I have set the motor model in the drive but the rest of the million settings? Never used a servo before
Anyone know these specific drives?