Messages

511

General Mach Discussion / Re: m30 question

« on: February 08, 2010, 08:37:57 AM »

thanks zealous

512

General Mach Discussion / Re: m30 question

« on: February 02, 2010, 09:25:12 AM »

Hood,
Thanks for the reply.
I wanted to use a more standard code. All of my machines out there already have the m30 at the end of the gcode and i did not want to send new post processors to everyone. If i can make a macro that uses the m30 i can also add choices for what it will do without having a special post processor and it frees people up to use more software.
Bill

513

General Mach Discussion / m30 question

« on: January 28, 2010, 09:11:08 AM »

If I make a macro for M30 will that override anything that the software does
automatically?

Bill

514

General Mach Discussion / Re: oscillating tangential knife

« on: January 25, 2010, 09:28:03 AM »

The knife does not attach to the spindle. The spindles I use are just a high frequency motor with no encoder for indexing. The knife I have is a heavy duty exacto blade or a utility knife blade. The part that holds the blade can be removed and a wheel can be used instead.

515

Brains Development / Re: Loadfile from a push button

« on: November 06, 2009, 09:14:55 AM »

This would need modified but take a look at this post.
http://www.machsupport.com/forum/index.php/topic,10910.0.html
Bill

516

General Mach Discussion / Re: oscillating tangential knife

« on: October 28, 2009, 09:38:05 AM »

Daniel,

Thanks for the help. I have a guy here that is good with the electronics side of things and will talk to him about making our own solenoid. I will go ahead and look at the mechanical side sense that is my strong side.

Bill

517

General Mach Discussion / Re: oscillating tangential knife

« on: October 27, 2009, 11:19:32 AM »

I did not think about something like an air chisel. I was still thinking in terms or an air motor. I will have to do some looking for things like air chisels.

Thanks for everyones input.
Bill

518

General Mach Discussion / Re: oscillating tangential knife

« on: October 27, 2009, 09:31:41 AM »

Daniel,

It is kind of hard to count. I was just taking a guess. I can design a mechanical system but I am worried about longevity. I like the idea you had about using a coil and magnet. How would I go about figuring out what I need to do that?

Bill

519

General Mach Discussion / Re: oscillating tangential knife

« on: October 26, 2009, 04:32:09 PM »

I do not know the exact frequency but if you look at the link below you can see what I am talking about. It is moving up and down very fast. I would not be surprised if it was 50 or 60hz.

http://www.comagrav.com/oscillating_tangential_knife.html

The travel only needs to be 1/16 to 1/18 inch.


Bill

520

General Mach Discussion / oscillating tangential knife

« on: October 26, 2009, 02:45:58 PM »

Has anyone made a oscillating tangential knife? I have made the tangential knife but now I need to make an oscillating one.

Bill