1411
CS-Lab / Re: CSMIO IP-M very slow input
« on: May 06, 2015, 05:58:31 PM »
I think what TPS says is the best way to try, it is the way I do the I/O with the CS-Lab controllers.
Note that when you do it that way you do not set up the I/O in Ports and Pins in Mach for these as if you do it will almost certainly cause a conflict.
Might also worthwhile taking the comments out to see what the log says.
Hood
Note that when you do it that way you do not set up the I/O in Ports and Pins in Mach for these as if you do it will almost certainly cause a conflict.
Might also worthwhile taking the comments out to see what the log says.
Hood