BLUF: I am trying to figure out how to reverse the DRO direction in MACH 3 so that moving the table to the left (tool to the right) results in a positive DRO movement rather than a negative.
Sorry if this as been addressed, but the search functionality is letting me down...
I have an Enco 91002 converted to CNC, running (SolidWorks) to (CamBam) to (Ethernet Smooth Stepper) to (G540). The way it is currently set up a table move left or towards me is a negative movement on the DRO, and right or away from me is a positive movement. I would prefer this to be reversed. I have been able to do this by changing the "scale" for the X and Y to "-1.0", but I would prefer a non-temporary solution. My Z axis behaves fine, down is negative, up is positive.
My first milling experience was on manual machines, first dials then a DRO that behaves like I want. My preference would be that my CNC VMC behaves the same, and my jobs aren't cut rotated 180* on the table.
Haven't seen a setting I can change (other than scale) to do this. Do y'all have the answer, por favor???