Hi all,
been using Mach3 with my plasma cutter now for about 4 months with no hick ups. The other day however, i created a drawing, saved it as a .dxf file and put it into SheetCam TNG, set it all up as i normally would and Mach3 couldn't recognise any of the code at all. I did everything as I always had but now it wont do it. The diagram in the top right that usually shows the shape to be cut was blank, only showing a small green dot in the centre, and having no lines of text in the top left where it usually has the G-Code list.
I'm absolutely at a loss for what is happening and can't find an answer in the forum so thought I'd ask you guys if anyone knows what the issue may be.
Cheers, Andy.