Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: anant on January 06, 2013, 02:49:38 AM
-
I am using cam softwares like aspire and artcam to design and generate gcodes..there are some designs which take 7-8 hrs to cut .. so there
is anyway to split gcode into 2 parts or more..
-
Hi Anant,
I appreciate that you are new to the forum and indeed you are very welcome here but please don't make multiple posting on the same subject.
Tweakie.
-
ok ok no problem I will not...