Machsupport Forum

Mach Discussion => Brains Development => Topic started by: Tarak on October 31, 2007, 12:32:55 AM

Title: Check to see if multiple LED's are enabled. Hmmmmmmm
Post by: Tarak on October 31, 2007, 12:32:55 AM

How can I set it to check if multiple LED's are enabled.
If they are on, then turn on or off another LED.
This pic is what I've tried, but to no avail.

Title: Re: Check to see if multiple LED's are enabled. Hmmmmmmm
Post by: Hood on October 31, 2007, 04:38:01 PM

Try this
Hood

Title: Re: Check to see if multiple LED's are enabled. Hmmmmmmm
Post by: Tarak on November 04, 2007, 02:34:02 PM

Thanks Hood, I'll give that a go.