I'm use to working on a HAAS so when I say Zero all I mean home all axis on the new machine. The Corner Sharping is something else, we have the right softwear to do corner sharping, it's the machine that's messing it us for some reason. The machine as a really BIG Gremlin..
HillBilly, using big words is not helping;) - but I'll make a note of it and ask the ppl that put the heap of crap together if they know the awnser to that, thx!
The Machine should have a defualt HOME position, if the spindle is to high it'll move down to that position, that position is not inside my freaken table! It should always move to like a midway between max and min z position. Thx for the help guys! Much appresiated!!!