Hello
New here and trying to find someone to help with getting my cnc router to work, It is a 3020T router and came with Mach3
I went through everything for the setup and still no go.
PC specs are
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CNC
System Manufacturer computertechlinkxppro
System Model D915GAG_
System Type X86-based PC
Processor Intel(R) Pentium(R) 4 CPU 3.20GHz, 3200 Mhz, 1 Core(s), 2 Logical Processor(s)
BIOS Version/Date Intel Corp. EV91510A.86A.0477.2005.1218.2319, 12/18/2005
SMBIOS Version 2.3
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name CNC\Jim
Time Zone Pacific Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 2.87 GB
Available Physical Memory 2.21 GB
Total Virtual Memory 5.75 GB
Available Virtual Memory 5.01 GB
Page File Space 2.87 GB
Page File C:\pagefile.sys
xml file attached
Any help would keep me from going crazy.
Thanks!