0 Members and 1 Guest are viewing this topic.
my readings were a steady 3.32 volts.
somethings amiss here. p2 on the breakout board is a steady 1.58 volts in both directions. p3 is at 5.14 in the down dir. 1.58 in the up dirp4 is at 1.54 in both dirp5 is at 5.14 in the left dir 1.58 in the right dirp6 is at 5.14 in to down dir 1.58 in the up dirp7 is at 5.14 in the page down dir. 1.58 in the up dirso it seems there might be an issue with p2 and p4?What are your thoughts?
p to ground
yes it appears to be doing just that