Pete has the new plugin installer, fixed and smoothed out the motion of the MPG jogging for all axis, added an option, to enable/disable a Mach3 estop if the Serial modbus coms are dropped, also added a feature to enable/disable the pendant estop, with suboptions for momentary vs. locking switch types.
to get the smooth jogging at high speed MPG turns, had to drop the "Shuttle Mode" of right switch position 9, and put that it just changes to Continous mode for jogging while in that postion.
Updated the Flash help file, xml, modbus configs are now much simple, cut them down to just 3 configs, and it will auto load the modbus cfg, if you run the OEM profile/screen set.
Pete is working on a Mylar label so the switch positions, buttons, and LEDs are labeled better.
scott