7441
General Mach Discussion / Re: M03 and M8 Reset?
« on: September 22, 2012, 07:42:15 AM »
Yes that is correct on both, try 1.43 for E-Stop if not then increase a wee bit at a time. The steps are 1.43 but you dont have to be exact with them as it will just default to the lower. What I mean is if you entered 3 the filtering would be seen as 1.43 by the SS.
Dont go too high though as you may end up with a delay if you need to use the E-Stop, personally I wouldnt like to go much above 10.
Hood
Dont go too high though as you may end up with a delay if you need to use the E-Stop, personally I wouldnt like to go much above 10.
Hood