14186
« on: November 01, 2010, 04:33:51 AM »
Ok I understand now what you are using the relays for and it should work fine. Sounds like you may have some duplicated pins.
For what you are wanting to do you should have the port and pin number for the second relay set up as enable Output and that is all. The relay 1 should be set up as an Output, doesnt matter which as you then tell Mach on the spindle setup page which output you are using for M3.
If you still have problems please attach your xml, the xml is a file that contains your configuration and you will find it in the main Mach3 folder, it will have the name of the profile you are using, so for example if using the standard Mach3Mill profile it will be Mach3Mill.xml. You will need to change the name before the forum will accept it, so suggest you copy to desktop and rename to spidy4fun.xml before you try and attach using the additional options button on the reply page.
Hood
Hood