3871
General Mach Discussion / Re: Power Supply Unit
« on: January 14, 2011, 05:37:42 PM »
Nic,
We already told you. The voltage rating must exceed the output voltage by some amount. The uF can be more than calculated
but preferable not less.
You wouldn't put a circuit breaker or fuse which is less than required for the amps you will draw, it explodes, like wise you wouldn't put
a capacitor not rated for the voltage you will use.
RICH
We already told you. The voltage rating must exceed the output voltage by some amount. The uF can be more than calculated
but preferable not less.
You wouldn't put a circuit breaker or fuse which is less than required for the amps you will draw, it explodes, like wise you wouldn't put
a capacitor not rated for the voltage you will use.
RICH