Hi Brian, I have some stange things going on with the plugin. With no program running if I click the spindle on, the dwell light starts to flash and the spindle button starts to flash, the dwell does not stop after the one second delay that is set, if I click the spindle off, it goes off (button stops flashing) but the dwell is still on, if I attempt to restart the spindle nothing happens, but the dwell light is still flashing. Now if I run a program, I can turn the spindle on and off with no trouble, but the dwell never flashes. Are these plugin bugs or because my system is not set up correctly? using a DMC-2140 over TCP, Mach3 V2.51 latest plugin. Thanks for the help,
Jim