631
Post Processors / Re: Fusion 360 / Autodesk Post Processors.
« on: December 23, 2020, 01:46:55 AM »
As a temporary ‘workaround’ until you get a post processor sorted, it is no real problem to use Notepad ‘Find and Replace’ function to automatically change every M11P1 to M62P1 and then every M10P1 to M63P1 (or whatever P#) to convert a Mach3 laser Gcode to a Mach4 laser Gcode.
Tweakie.
Tweakie.