661
CS-Lab / Re: [CSMIO-IP/S + MACH3] using an analogue output to control an external device
« on: November 25, 2020, 07:40:13 AM »
The problem is that the S### command breaks the CV chain.
Axis movements do not break the chain so movement of a spare axis such as from B0 to B100 will create step and direction signals on the Output pins of your choice which your Arduino could use. Also electronic potentiometers are driven by step and direction signals. Food for thought perhaps ?
Tweakie.
Axis movements do not break the chain so movement of a spare axis such as from B0 to B100 will create step and direction signals on the Output pins of your choice which your Arduino could use. Also electronic potentiometers are driven by step and direction signals. Food for thought perhaps ?
Tweakie.