15721
General Mach Discussion / Re: charge pump
« on: May 05, 2010, 06:25:03 AM »
There are a lot of Breakout Boards that support the Charge Pump but if you dont have one then you can make a circuit up, there is info on the documentaion page of a chargepump circuit, see here http://www.machsupport.com/docs/ChargePumpSafety.pdf
Be aware though that the Charge Pump was not intended as a safety device when Mach is running, it was designed as a means of stopping the twitching of motors that can occur when Windows is booting and before Mach is running.
Hood
Be aware though that the Charge Pump was not intended as a safety device when Mach is running, it was designed as a means of stopping the twitching of motors that can occur when Windows is booting and before Mach is running.
Hood