Machsupport Forum

Mach Discussion => Mach SDK plugin questions and answers. => Topic started by: BigZ on March 20, 2008, 09:55:39 PM

Title: Video Mouse Move Problem?
Post by: BigZ on March 20, 2008, 09:55:39 PM

I have successfully installed a webcam to my machine.

My problem is when using the Mouse move function the machine moves correct in the Y  axis direction but the opposite to what it should for the X axis. I have tried flipping the image and rotating the camera but to no avail. I am wondering if it has to with reversing my Z axis in the Config Homng /Limits. 

The other problem is the 'Show positon' and 'Mouse Position' are not legible when enabled.

Cheers

Liam

Title: Re: Video Mouse Move Problem?
Post by: dandumit on April 07, 2008, 08:09:59 AM

I have too some problems with this plugin. the nastiest issue is the inverted movement (in my case) on Y axis.
How did you fliped the image ?

Title: Re: Video Mouse Move Problem?
Post by: BigZ on April 07, 2008, 03:39:27 PM

I tried flipping the mage but it didn't help. It also made manual jogging harder.