Hello again,
just have a look to LazyCam:
1. You can turn the work object by pressing the center button (Wheel) of the mouse, to look to the drawing sidewise in 3D.
This is where you can already see how the toolpath will look like.
2. But now, lets look NUMBERS:
- have a look on the left side fo the screen: There you can see the tree of layers in your workpiece.
- activate Layer 0 by doing a click to it.
- Now, click "layers" in the menu at the bottom side of the LazyCam Window.
- Here, you can see:
Step per pass: 0.1250 units
Cut Start: 0.1000 units
Cut depth: -0.1250 units
- this will generate a G-code which does -0.0250 (=0.1 minus 0.125), and the the rest of 0.1 to get to -0.125.
Hopefully this helps.
best regards,
Konrad