1711
CS-Lab / Re: Matsuura MC500v retrofit with CSMIP/IP-A
« on: February 22, 2015, 05:42:43 PM »
Nope looks like it is still greyed out if you choose the DAC option rather than spindle axis
Same with the closed loop option.
Of course if your VFD can accept +/- 10v commands rather than 0-10v then you could set it up as a spindle axis.
Hood
Same with the closed loop option.
Of course if your VFD can accept +/- 10v commands rather than 0-10v then you could set it up as a spindle axis.
Hood