4121
General Mach Discussion / Re: Mapping the path for M11 / M10 commands
« on: November 17, 2015, 09:42:55 AM »
With the M10/M111 commands the 'P' relates to the Output # (not the pin number).
So M11P1 would switch on Output#1 (which in turn could be mapped to output pin 17) at the instant of an axis movement.
When using the Smooth Stepper configure the M10 /M11 commands in the SS plugin software.
Tweakie.
So M11P1 would switch on Output#1 (which in turn could be mapped to output pin 17) at the instant of an axis movement.
When using the Smooth Stepper configure the M10 /M11 commands in the SS plugin software.
Tweakie.