4041
General Mach Discussion / Re: Vcarving to Letter Cutout
« on: December 10, 2015, 07:33:23 AM »
Hi Bill,
It has a lot to do with the post processor you use to create the Gcode from your CAD/CAM software.
For example...
Vectric has Mach3 post processors (which will create the Gcode to process circles as a series of straight lines) and Mach3 arcs post processors (which will create the Gcode to process circles as a series of arcs) - most CAD/CAM (that I have used) have similar options.
Tweakie.
It has a lot to do with the post processor you use to create the Gcode from your CAD/CAM software.
For example...
Vectric has Mach3 post processors (which will create the Gcode to process circles as a series of straight lines) and Mach3 arcs post processors (which will create the Gcode to process circles as a series of arcs) - most CAD/CAM (that I have used) have similar options.
Tweakie.