3181
General Mach Discussion / Re: mach3 connect 2 Z axis
« on: October 19, 2011, 05:32:59 PM »Quote
For 4 years there is no possibility, so you did not learn what's come on in this
Now it's 4 years, and another machine, and using who knows what computer , BOB, etc you are using.
Frankly, if you haven't solved the other three machines, or even addressed what was suggested in the other posts.....
you will end up at the same place only with a more complex situation to deal with. Then numerous posts and time will be spent trying to help
you and you won't do what was suggested. Thus no closure on anything and the story will continue. Probably will go onto a 5th machine and start all over.
RICH