877
« on: May 01, 2016, 04:59:29 PM »
There is also the KFlop with Kanalog addon which will work with with analogue command drives.
I have never used it or the DSPMC or Galil but do have the CSMIO/IP-A on my Chiron FZ12S.
It is an excellent controller, the base unit has
16 digital outputs
24 digital Inputs
6 channels of +/- 10v
6 channels of differential encoder inputs
2x 0-10v outs
4x 0-10v inputs
There is an Encoder module that can be used to hook up a spindle encoder for use for rigid tapping.
An MPG module that can be used for extra I/O and a MPG wheel
You can also expand the I/O with extra modules (up to 16 I think) which have 16 digital inputs and 8 digital outputs.
The CSMIO can access the I/O via its internal modbus via VB or Brains or you can set up the standard way in Mach via Inputs and Outputs and OEM triggers in Ports and Pins or you can use a mixture of all three methods.
Hood